If you’re going through a ton of models in your pursuit of the best laptop for Solidworks, then you’ve finally come to the right place.
Solidworks is a demanding software. You’re not going to get a good experience with an average laptop. You need a solid laptop (no pun intended) with excellent specs to get the most out of Solidworks.
There are tons of models that satisfy the above criterion which itself presents a problem when looking for a laptop. With so many options, how do you end with that one laptop that is perfect for you?
That’s where we come in. We have done all the research so that you don’t have to waste your time reading the pros and cons of 100s of laptop models. Instead, go to the section that suits you the most and pick the right notebook for you.
With further ado, let’s dive into the best laptops for running Solidworks.
The Best Laptops For Solidworks
|MSI GL65 10SFK-062||
||View on AmazonRead Reviews|
|Acer Predator Helios 300||
||View on AmazonRead Reviews|
||View On AmazonRead Reviews|
|Surface Book 2||
||View on AmazonRead Reviews|
|ASUS ZenBook 13||
||View on AmazonRead Reviews|
Best Laptops For Solidworks In 2022
Let’s take a look at our best picks
1. Editor’s Choice – MSI GL65 Leopard 10SFK-062
Our Editor’s choice for the best laptop for Solidworks is the MSI GL65 Leopard 10SFK-062.
MSI is well known for its gaming laptops as they give an excellent balance between performance and price. This laptop we have here is also a direct result of that philosophy.
The MSI GL65 Leopard 10SFK-062 is an excellent laptop that comes with fantastic specs but it doesn’t burn a hole in your pocket. The performance per dollar is excellent and you won’t have any issues with that.
The first thing that grabs your attention in this laptop is its display. We have a 15.6-inch display that comes with full HD resolution. Being a gaming display, we have a refresh rate that is much better than the traditional 60 Hz. The 144 Hz refresh rate makes things slow so smoothly that you enjoy simple elements even when you’re not gaming.
This refresh rate gives you a fantastic performance when you are rendering and playing with your models. The overdrive response time of 3 ms also plays a pretty good but when it comes to the fluidity of this display. Overall, the display is a fantastic one and there are absolutely no complaints here.
The keyboard on this device is another homerun. We have a Steelseries keyboard that comes with per-key RGB lighting. This means you can customize the backlighting of every key on your keyboard making 100% yours. The keys also come with an of travel giving you a pleasant typing experience.
The trackpad on this display is quite good. It is the windows precision touchpad and you will have a good time playing with all the gestures on Windows operating system. Together, the keyboard on the trackpad gives you a solid experience when it comes to input devices.
The processor on this MSI GL65 Leopard 10SFK-062 laptop is a 10th generation Intel processor. This is an Intel Core i7 processor that comes with a base clock speed of 2.6 GHz and a maximum clock speed of 5.1 GHz. With six physical cores and 12 threads, this processor has a smart cache memory of 12 MB. This is, without doubt, one of the most powerful Intel chips out there at the moment.
The processor handles Solidworks like a boss and you can run even complex applications on it without any issues. The processor can easily work on simple models without even clocking above base speed which gives us a good idea of how powerful this Intel chip is.
The memory department on this MSI GL65 Leopard 10SFK-062 is made up of 16GB of DDR4 type Ram. The memory comes with a clock speed of 2666 MHz and is one of the fastest out there. This memory gives you the ability to run multiple applications at the same time without impacting the overall performance of the laptop.
Concerning Solidworks, this memory allows you to run complex models without bringing any considerable lag to the system’s performance. Even if you are a professional, this memory will serve you well without any issues.
The graphics card on this model is one of the main reasons why this is our editor’s choice. At this price point, having an Nvidia GeForce RTX 2070 is more than impressive. This is a high-end graphics card that comes with a dedicated video memory of 6GB. The graphics card comes with support for all the high-end features like ray tracing, etc.
Solidworks is at its best with a graphics card like this whether it is designing or rendering. This graphics card can be utilized best by high-end users and professionals.
The storage on this laptop is made up of 512GB solid-state drive. This is fast storage that is at least 15 times faster than your average mechanical hard drive. When it comes to performance, this SSD does a fabulous job and loads both the operating system as well as Solidworks in record time.
Overall, the MSI GL65 Leopard 10SFK-062 is the best laptop for running Solidworks In this price range. The laptop brings premium features an office you a stellar Solidworks experience without compromising on anything. If you’re looking for a reliable laptop to work on Solidworks, then this is probably it.
- Excellent specs
- Solid graphics performance
- None at this price point
2. Runner Up – Acer Predator Helios 300
The Acer Predator Helios 300 is our runner-up choice when it comes to Solidworks.
This laptop from Acer is a lot more affordable than our editor’s choice but manages to give a very similar performance when it comes to handling an application like Solidworks and other similar ones.
This Acer Predator Helios 300 is also a gaming machine. As with other gaming machines, this laptop also comes with an impressive array of specs that promises a good user experience when it comes to gaming.
This Acer laptop comes with a powerful processor from Intel. The Intel Core processor as a 9th generation chip that comes with 6 physical cores and 12 threads. The processor has a base clock speed of 2.3 GHz and can clock to a maximum of 4.7 GHz which is more power than you’ll ever need when dealing with Solidworks.
This is a high-end processor from Intel and as a fantastic job when it comes to handling heavy applications like Solidworks. You can work even on the most complex of models without any issue.
The laptop comes with 16GB of RAM in the memory department that has a clock speed of 2666 MHz. This RAM is perfect for those who are working with complex projects and those with medium complexity. This memory is overkill for students and beginners but if you are going to switch to heavy lifting anytime soon, then you will find this Ram pretty useful.
The graphics card we have on this Acer laptop is an Nvidia GeForce 1660 Ti graphics card. This is an upper mainstream graphics card that comes with a dedicated video RAM of 6 GB. This GPU is perfect for running Solidworks and can handle even models with a ton of complexity without any issues.
If you are a gamer, you will enjoy playing games on this laptop, thanks to this excellent graphics card. With this GPU in place, You will be able to play the most recent games without any issues. If you want to play the latest and the greatest, then you may have to reduce the settings a bit but that’s not a deal-breaker in any way.
The display on this laptop is a pretty good one. We have a 15.6-inch LED-backlit display that comes with a resolution of 1920 x 1080 pixels. Since we are dealing with a gaming laptop here, the screen comes with some extra premium features that you won’t get on normal laptops.
Examples we have a refresh rate of 144 Hz and an overdrive response time of 3 ms which are not something you get on regular laptops. Both these features present you with a super smooth output on the display that Will change the way you use your computer.
When it comes to picture quality, this display does a fantastic job. The colors are vivid and the texts are super sharp making this a good choice for Solidworks. The display also comes with a maximum brightness of more than 300 nits which is quite good.
The storage on this laptop is made up of 512 gigs of solid-state drive storage. This SSD is quite fast and creates quite an impact when it comes to the everyday performance of the laptop. It loads Solidworks quickly and the same can be said for the operating system as well. If you are coming from a mechanical hard drive, this storage will make your day.
Overall, the Acer Predator Helios 300 is a solid choice for heavy applications. A high-end processor, more than sufficient memory, and an upper mainstream graphics card make this what is the best laptops for Solidworks. If you’re looking for an affordable laptop that doesn’t compromise on performance, then this is a good one.
- Excellent performance
- Beautiful display
- Impressive keyboard and touchpad
- A bit bulky
3. Budget Choice – MSI GF63
If you’re looking for a budget laptop to run Solidworks, then this MSI GF63 model is the right choice. This laptop comes under $900 and offers a pretty good overall experience when running Solidworks.
Despite being a gaming laptop, this laptop is not that heavy and also is a lot slimmer than most mainstream gaming laptops. The design of this laptop is quite good and makes it more fashionable when you consider the price.
The display we have here is a 15.6-inch LED-backlit display with a resolution of 19 20 by10 80 pixels. This display is not a special one by any means but it does its job in the best way possible. The colors on the display are accurate and are quite vibrant. The contrast ratio on the display is also quite good, As a result of which you get deep blacks and bright whites.
The processor that powers this laptop is a dual-core i5 processor from the 9th generation of Intel chips. this is a pretty good processor and can deliver power when required. It handles Solidworks without any issues and gives you impressive user experience. The processor is also good for running a hold of heavy applications which makes this laptop truly multifaceted.
The memory department on this device comes with 8 GB of DDR4 type memory. Whether this memory is enough or not depends upon the user and the complexity of the project is dealing with. For most simple and medium-sized projects, this memory will be enough. But if you are a professional who works on complex stuff, then this memory might not be as good.
The graphics card on this MSI GF63 model is an Nvidia GeForce 1650 graphics card. This is a pretty good graphics card that comes with a dedicated memory of 4 GB. With this GPU, you will be able to run Solidworks without any issues whatsoever.
Overall, the MSI GF63 is an excellent laptop that comes at an affordable price range. It gives you all the hard way you need to get a reliable Solidworks experience in a budget.
- Good graphics performance
- Impressive design
- None at this price point
4. Surface Book 2
The Microsoft Surface Book 2 is our choice for the best convertible laptop for Solidworks.
This is the most expensive laptop on the list and for good reason. The laptop brings a horde of premium features that are not available on the other models discussed. If you can make good use of those features, then the premium price tag of the laptop is worth it.
The display on this laptop is the first thing that grabs your attention. We have a 15-inch LED-backlit display that comes with a resolution of 3240 x 2160 pixels. This is ultra-high-definition resolution and is the best you can get on a laptop right now.
The display comes with an excellent pixel density as a result of which you get fantastic images and texts. The colors are vibrant and make the display an excellent choice when it comes to working on color-related tasks. The display is also a great candidate for Solidworks as it brings fantastic colors along with a brilliant contrast ratio.
One of the best things about a convertible laptop is that you can change the mode of the device according to your mood. Surface Book 2 is the best convertible laptop as it gives you the ability to completely detach the screen from the rest of the laptop. Most convertible laptops don’t have this option, and that’s why this Microsoft offering is held higher when compared with the others.
The graphics card on the Surface Book 2 is an Nvidia GeForce 1060 GPU. This is a pretty good graphics card and it comes with a dedicated memory of 4 GB. He will be able to run Solidworks and render your models without any issues. You can also play all your favorite games without meddling with the settings too much. If you want to play the latest and the greatest, then you might have to play with the settings a bit.
The processor that powers this Microsoft Surface Book 2 is an Intel Core i7 processor from the eighth generation of Intel chips. This is a high-end processor that comes with a base clock frequency of 1.9 GHz and a maximum clock speed of 4.2 GHz. The processor does very well when it comes to acing benchmark tests.
Running Solidworks is no challenge for this processor as it handles it with ease. You can work from simple projects to the most complicated ones on this laptop without any issues whatsoever.
The memory department on this Microsoft laptop comprises of 16GB of RAM that is of DDR for type memory. This Ram hello is the user to run several things at the same time without damaging the performance of the laptop. Solidworks as well and makes full use of the memory presenting you with solid user experience.
Surface Book 2 comes with one of the fastest storage drives over there. We have a 256GB solid-state drive for storage which is quite fast and helps in improving the performance of the laptop. The storage amount aspect is a bit disappointing but you can always upgrade it to 512 GB or 1 TB if you want more space on your device.
Overall, the Microsoft Surface Book 2 is probably the best convertible for Solidworks. It brings a myriad of features that you will only find in convertible laptops and execute them to perfection. Whether you are a beginner or a seasoned Solidworks professional, this convertible laptop will give you a lot of reasons to like it.
- Sleek design
- Solid performance
- Impressive battery life
- A bit expensive
5. ASUS ZenBook 13
The ASUS ZenBook 13 is the best ultrabook for Solidworks.
The model we have here is a 13.3-inch one that comes with excellent specs at a price that is very affordable for those who want to run Solidworks.
The laptop weighs under 3 pounds making it one of the lightest laptops out there in this size category. So if you’re going after portability, then this ZenBook is probably the way to go.
The battery life is also one of the best selling points of this ultrabook. With light use, you can easily get around 10 to 12 hours of battery life from this fantastic laptop. When running Solidworks, this number will drop drastically but you would still get impressive battery life.
The display on this laptop is a 13.3 inch one with full HD resolution. This display has an improved pixel density thanks to the much smaller screen and gives you sharp images and texts that are a pleasure to look at. The color quality is also on point making this laptop a good one for those who work on color-related tasks like photo editing and graphic design.
The processor that powers this ASUS ZenBook 13 is an Intel Core i7 processor from the eighth generation of Intel chips. this processor is slightly less powerful than the one we find in the Microsoft Surface Book 2 but still manages to run Solidworks without any issues whatsoever.
The memory on this ASUS laptop is made up of 16 GB of DDR four type Ram. This RAM is more than enough for most users who prefer an ultrabook. You will have a lot of memory to play with even when working on Solidworks which is always a great position to be in. The memory department will not be the bottleneck when you keep pushing for more complex projects.
The storage on your laptop decides how its performance is going to be on a daily basis. Luckily, this laptop comes with a 512 GB solid-state drive. This SSD is quite fast when it comes to both reading as well as writing. It loads the operating system in a few seconds and also does the same for Solidworks. If you’re coming from the back of a mechanical hard drive, then this SSD will completely turn your world upside down.
The lack of a dedicated graphics card might be surprising to some but Ultrabooks do not get a dedicated graphics card in most cases. The integrated graphics card here does a pretty good job when it comes to handling the rendering that happens inside Solidworks.
Overall, the ASUS ZenBook 13 is a fantastic ultrabook that comes at a pretty consumable price point. It gives you all the features as well as performance to justify the price. If you are looking for a super-portable laptop to run Solidworks, then this is the right choice.
- Super Portable
- Excellent Performance
- Solid battery life
What To Look For In The Best Laptop For Solidworks?
If you’re not happy with the available options above, that’s fine.
You can always find a better choice that is tailored to your specific needs. Here are some requirements for laptops to run Solidworks so that you don’t end up with a dud.
When you’re working on an application like Solidworks, it is important to have a good display to aid your efforts.
You will be working on making models and renders which will definitely need a good display to make your life much easier.
When it comes to the display, the first and foremost factor you should take into account is the size of the display. For Solidworks, we recommend going with a 15.6-inch display.
The 15.6-inch display is big enough to give you all the details on screen without any problem. It is also wide enough to help you with multitasking whenever required.
When dealing with applications like Solidworks, you will always benefit from having bigger screens. So you might wonder if going with a 17.3-inch screen is the right decision. Unfortunately, 17.3-inch screens add a lot of bulk, and carrying those laptops from one place to another will become a serious problem over time.
On the other hand, if you’re someone who wants a super portable device, then even a 15.6-inch laptop is not going to cut for you. You will be better off with a 13.3-inch ultrabook which is usually super light and is perfect for portability.
The resolution of your display is the next most important factor.
Even if you are on the tightest of budgets, do not go for anything less than full HD resolution. Most budget notebooks might give you the option of going for a 720 p display, but we would avoid them like the plague as they will give you a lot of problems in the future.
A full HD display gives you excellent quality pictures without compromising on clarity. The pictures are usually clear while the text is sharp enough for everyday use. With this resolution, the number of times you have to zoom in to your elements is also significantly reduced.
You will also benefit from a higher resolution display like a quad HD or even a 4K display. The higher resolution you have on your display, the better will be the output when it comes to an application like Solidworks. Of course, going for a higher resolution display is going to increase the total cost of a laptop but if you can afford it, then there is absolutely no harm.
There are two types of laptop screen when it comes to reflection. You can either go with a glossy display that does not hold back when it comes to reflecting images, or you can go with an anti-reflective display that absorbs reflections and gives you a much cleaner display to work with.
Both displays have their advantages and disadvantages but it is your preference that makes a screen right for you. If you prefer color accuracy over an anti-reflective screen then you probably should go with a glossy display.
Also, make sure you check with a maximum display brightness on your display. It is better to have a laptop that has at least a maximum brightness of 300 nits. Most high-end displays will have a minimum of 400 nits and the best ones can even go up to 500 or 600 nits. Higher your display’s brightness, the more comfortable you will be using it in an open brightly lit space.
This is one of the easier decisions for you.
If you want to run Solidworks, then Windows operating system is the way to go. The software is not supported on macOS which means you will not be able to run it on a Mac unless you install Windows as a second operating system.
If you are looking for a Mac, then make sure you get the Intel-based one. Future Apple laptops will be based on Apple Silicon which means you won’t be able to install windows as a parallel operating system. This has been confirmed by higher authorities an apple as they are not willing to direct boot a competitor’s operating system.
Picking a ride processor is an art. When dealing with Solidworks, you should know that your laptop is only as good as the processor you select.
Before we get into the right processor for Solidworks, let’s take a look at what you should run away from. Avoid anything that has two cores. Dual-core processors are not meant for heavy lifting which means they will do a pretty crappy job when it comes to Solidworks.
It goes without saying that you should also avoid entry-level processors like Intel Celeron, atom, and Pentium chips. These professors are meant for sub$300 devices and they don’t concern you.
For Solidworks, we recommend going with an Intel Core i5 or i7 processor. Both these processes are capable of handling the application and can do a good job depending on their configuration. We also recommend going with a minimum of four physical cores. If you can get a hexa core or an octa-core processor, you will have a lot of advantages.
Let’s talk about clock speed. As a minimum, the processor should have a base clock speed of at least 2.0 GHz. This clock speed allows you to work on small and medium-sized projects without having to use Turbo boost. This means your laptop will get much better performance as they won’t have to kick in the fans and work a lot harder.
The processor, however, must have the ability to boost the clock speed to higher levels with the help of turbo boost or similar functionality. This is essential as you will need more power when working on more complex projects.
Another common question you are going to have is whether to go with an Intel or AMD processor. Intel processors dominate the market when it comes to processors. Most laptops that manufacturers launch comes with Intel processors. But this doesn’t mean you have to go with one.
Yes, Intel chips do come with excellent support and also offer excellent performance. But AMD has also improved its processors significantly and can even replace Intel chips at a much better price. If you’re planning to sell a few hundred dollars here and back, going for an AMD processor would help.
The memory on your laptop also plays an important role when it comes to everyday use of Solidworks.
If you are a student or a learning professional who is going to work on only small projects, then you will be fine with 8GB of RAM.
But if you’re going to work on medium and more complex projects, then you are going to need a minimum of 16 GB of RAM for the best experience. You can manage medium projects with just eight gigs but there will be bottlenecks.
There are situations where dealing with complex projects might even need 32 GB of RAM. If you are a professional working for multiple clients, then this memory will surely come in handy.
When choosing memory, make sure you are going for the latest DDR4 type memory. Some laptops come with the older DDR3 type RAM which is not that bad but the latest generation is much faster and can handle more work at the same time. You also get much better clock speeds with DDR4 type RAM when compared to the previous generation.
There are two important factors when it comes to selecting storage, storage space, and speed.
If you ask us, the performance of your storage is more important than the amount of storage it brings. This is exactly why you should always go for a solid-state drive when it comes to picking storage for running an application like Solidworks.
We have all used traditional mechanical hard drives in the past and they’ve been a great help. But these days, they are very slow and can throw you off your rails when you’re working on something important.
The SSDs on the other hand is extremely fast and can give you top-notch performance in the blink of an eye. They can load the operating system in a few seconds which could take a couple of minutes when you’re working with a traditional hard drive.
The fastest solid-state drive is at least 17 times faster than the average mechanical hard drive which is a huge difference when it comes to everyday performance.
Let’s talk about the amount of storage you will need. If you’re just starting, then chances are you’re not going to have a lot of budget on your hands. In this case, we recommend going with a 256 GB solid-state drive. This SSD is not that small but gives you enough space to play with your models and renders.
If you have the budget for it, then we suggest going for either of 512 GB or a 1 TB solid-state drive. The higher the storage you have on your SSD, the faster its performance will be. So a 1TB solid-state drive is going to have much better reading and writing speeds when compared with an SSD with less storage.
If you are tight on money, then you can make use of hybrid storage devices that come with both a mechanical hard drive as well as a solid-state drive. You can load your frequently used applications and important files in the part of the solid-state drive of the storage and can store all other archived data on the mechanical hard drive.
Graphics is another department you don’t want to skimp on.
Having a good graphics card on your laptop is going to make things a lot easier. A good graphics card will make a rendering smooth and will help save you a lot of time.
Some people say that you need workstation graphics cards when it comes to applications like Solidworks, but you will be perfectly fine with consumer-grade graphics cards as they have the same amount of power to get things done.
If you are going to be dealing with small and medium-sized projects, then most mid-range graphics cards will be fine for your needs. If you are a professional who needs to work on complex projects day in and day out, then you need the best ones out there. Most Nvidia graphics cards in the 10th and 20th generations will be a good fit.
If you are someone who prefers portability over power, then you are going to be stuck with an integrated graphics card. Make sure that the processor is the latest one so that you get the latest integrated graphics card. Working on Solidworks with an integrated graphics card is not the best experience but with the right GPU, you will still get things done.
The keyboard on your laptop should have a good layout and should give you a pleasant typing experience. Key travel is a grey area on laptop keyboards so be sure to pick one that you’re comfortable with.
Having a bad keyboard on your laptop can affect your workflow badly. Be sure to try out the keyboard or get reviews from people who have used the keyboard to make sure that it won’t let you down in the future.
The trackpad on your laptop should be pretty good as well. The surface should be smooth and should be void of any friction. Since we are looking for Windows laptops, the trackpad should be a Windows precision one and should come with perfect support for all Windows operating gestures.
Make sure your laptop comes with good connectivity options. When talking connectivity, you don’t need the most amazing ones but the essential ones that you will be working with on a daily basis.
Your laptop must have a USB type C port that can transfer data, charge your laptop, and also connect your laptop to a high-end external display. You should also have at least a couple of USB 3.0 ports that can come in handy for data transfer and external connectivity.
Having an HDMI port will help to connect your laptop to a projector or an external display without making a fuss. A display board can also achieve the same.
Wireless connectivity on a laptop is as important as wired connectivity. The laptop should come with the latest Bluetooth version and should give you a good range with uninterruptible wireless connectivity. Make sure that the laptop comes with the latest Wi-Fi as well so that you can get super high internet speeds without the need for an ethernet port.
While other factors are quite important for Solidworks, this is probably the most important factor when it comes to purchasing a laptop.
Your budget will always decide the laptop you’re going to get and there is no changing that. This is why we have picked a moderately affordable laptop as our editor’s choice.
If you can’t afford that, you can always go with our budget option which is a lot cheaper and will give you a similar performance if not better. If you are a beginner or a student, then you can even go with cheaper models to get decent performance with Solidworks.
That brings this mammoth post to an end.
Like we mentioned, Solidworks is a demanding software, and finding the best laptop for Solidworks is a good challenge as any.
We hope this post was of some use in helping you find the right laptop for you. If you have any issues or queries, do not hesitate and contact us, and will get back to you at the earliest.